History of the Zapata Telephony Project ... by JDixon

K5TRY
Posts: 36
Joined: Fri Mar 09, 2012 8:25 am
Location: Springdale, AR

History of the Zapata Telephony Project ... by JDixon

Postby K5TRY » Sat Sep 29, 2012 12:32 am

History of the Zapata Telephony Project

>
> History of Zapata Telephony and how it relates to Asterisk PBX
>
> Jim Dixon
>

>
> About 20-25 or so years ago, AT&T started offering an API
> (well, one to an extent, at least) allowing users to
> customize functionality of their Audix voicemail/attendant
> system which ran on an AT&T 3BX usually 3B10) Unix platform.
> This system cost thousands of dollars a port, and had very
> limited functionality.
>
> In an attempt to make things more possible and attractive
> (especially to those who didnt have an AT&T PBX or Central
> Office switch to hook Audix up to) a couple of manufacturers
> came out with a card that you could put in your PC, which ran
> under MS-DOS, and answered one single POTS line (loopstart
> FXO only). These were rather low quality, compared with
> today's standards (not to mention the horrendously pessimal
> environment in which they had to run), and still cost upwards
> of $1000 each. Most of these cards ended up being really bad
> sounding and flaky personal answering machines.
>
> In 1985 or so, a couple of companies came out with
> pretty-much decent 4 port cards, that cost about $1000 each
> (wow, brought the cost down to $250 per port!). They worked
> MUCH more reliably then their single port predecessors, and
> actually sounded pretty decent, and you could actually put 6
> or 8 of them in a fast 286 machine, so a 32 port system was
> easy to attain. As a result the age of practical Computer
> Telephony had begun.
>
> As a consultant, I have been working heavily in the area of
> Computer Telephony ever since it existed. I very quickly
> became extremely well- versed in the hardware, software and
> system design aspects of it. This was not difficult, since I
> already had years of experience in non-computer based telephony.
>
> After seeing my customers (who deployed the systems that I
> designed, in VERY big ways) spending literally millions of
> dollars every year (just one of my customers alone would
> spend over $1M/year alone, not to mention several others that
> came close) on high density Computer Telecom hardware.
>
> It really tore me apart to see these people spending $5000 or
> $10000 for a board that cost some manufacturer a few hundred
> dollars to make. And furthermore, the software and drivers
> would never work 100% properly. I think one of the many
> reasons that I got a lot of work in this area, was that I
> knew all the ways in which the stuff was broken, and knew how
> to work around it (or not).
>
> In any case, the cards had to be at least somewhat expensive,
> because they had to contain a reasonable amount of processing
> power (and not just conventional processing, DSP
> functionality was necessary), because the PC's to which they
> were attached just didnt have much processing power at that time.
>
> Very early on, I knew that someday in some "perfect" future
> out there over the horizon, it would be commonplace for
> computers to handle all of the necessary processing
> functionality internally, making the necessary external
> hardware to connect up to telecom interfaces VERY inexpensive
> and in some cases trivial.
>
> Accordingly, I always sort of kept a corner of an eye out for
> what the "Put on your seatbelts, youve never seen one this
> fast before" processor throughput was becoming over time, and
> in about the 486-66DX2 era, it looked like things were pretty
> much progressing at a sort of fixed exponential rate. I knew,
> especially after the Pentium processors came out, that the
> time for internalization of Computer Telephony was going to
> be soon, so I kept a much more watchful eye out.
>
> I figured that if I was looking for this out there, there
> *must* be others thinking the same thing, and doing something
> about it. I looked, and
> searched
> and waited, and along about the time of the PentiumIII-1000
> (100 MHz Bus) I finally said, "gosh these processors CLEARLY
> have to be able to handle
> this".
>
> But to my dismay, no one had done anything about this. What I hadn't
> realized was that my vision was 100% right on, I just didnt know
> that *I* was going to
> be one that implemented it.
>
> In order to prove my initial concept I dug out an old Mitel
> MB89000C "ISDN Express Development" card (an ISA card that
> had more or less
> one-of-everything
> telecom on it for the purpose of designing with their telecom
> hardware) which
> contained a couple of T-1 interfaces and a cross-point matrix
> (Timeslot- Interchanger). This would give me physical access
> from the PC's ISA bus to the data on the T-1 timeslots
> (albeit not efficiently, as it was in 8 bit I/O and the TSI
> chip required MUCHO wait states for access).
>
> I wrote a driver for the kludge card (I had to make a couple
> of mods to it) for FreeBSD (which was my OS of choice at the
> time), and determined that I could actually reliably get 6
> channels of I/O from the card. But, more importantly, the 6
> channels of user-space processing (buffer movement, DTMF
> decoding, etc), barely took any CPU time at all, thoroughly
> proving that the 600MHZ PIII I had at the time could probably
> process 50-75 ports if the BUS I/O didnt take too much of it.
>
> As a result of the success (the 'mie' driver as I called it)
> I went out and got stuff to wire wrap a new ISA card design
> that made efficient use of (as
> it
> turns out all of) the ISA bus in 16 bit mode with no wait
> states. I was successful in getting 2 entire T-1's (48
> channels) of data transferred over the bus, and the PC was
> able to handle it without any problems.
>
> So I had ISA cards made, and offered them for sale (I sold
> about 50 of them) and put the full design (including board
> photo plot files) on the Net for public consumption.
>
> Since this concept was so revolutionary, and was certain to
> make a lot of waves in the industry, I decided on the Mexican
> revolutionary motif, and named the technology and
> organization after the famous Mexican revolutionary Emiliano
> Zapata. I decided to call the card the "tormenta" which, in Spanish,
> means "storm", but contextually is usually used to imply a
> "*BIG* storm", like a hurricane or such.
>
> That's how Zapata Telephony started.
>
> I wrote a complete driver for the Tormenta ISA card for *BSD,
> and put it out on the Net. The response I got, with little
> exception was "well that's great for BSD, but what do you
> have for Linux?"
>
> Personally, Id never even seen Linux run before. But, I can
> take a hint, so I went down to the local store (Fry's in
> Woodland Hills) and bought a copy of RedHat Linux 6.0 off the
> shelf (I think 7.0 had JUST been released but was not
> available on shelf yet). I loaded it into a PC, (including
> full development stuff including Kernel sources). I poked
> around in the driver sources until I found a VERY simple
> driver that had all the basics, entry points, interfaces, etc
> (I used the Video Spigot driver for the most part), and used
> it to show me how to format (well at least to be functional)
> a minimal Linux driver. So, I ported the BSD driver over to
> Linux (actually wasnt *that* difficult, since most of the
> general concepts are roughly the same). It didnt have
> support for loadable kernel modules (heck what was that? in
> BSD 3.X you have to re-compile the Kernel to change
> configurations. The last system I used with loadable drivers
> was VAX/VMS.) but it did function (after you re-compiled a
> kernel with it included). Since my whole entire experience
> with Linux consisted of installation and writing a kernel
> module, I *knew* that it *had* to be just wrong, wrong,
> wrong, full of bad, obnoxious, things, faux pauses, and
> things that would curl even a happy Penguin's nose hairs.
>
> With this in mind, I announced/released it on the Net, with
> the full knowledge that some Linux Kernel dude would come
> along, laugh, then barf, then laugh again, then take pity on
> me and offer to re-format it into "proper Linuxness".
>
> Within 48 hours of its posting I got an email from some dude
> in Alabama (Mark Spencer), who offered to do exactly that.
> Not only that he said that he had something that would be
> perfect for this whole thing (Asterisk).
>
> At the time, Asterisk was a functional concept, but had no
> real way of becoming a practical useful thing, since it
> didnt, at that time, have a concept of being able to talk
> directly (or very well indirectly for that matter, being that
> there wasnt much, if any, in the way of practical VOIP
> hardware available) to any Telecom hardware (phones, lines,
> etc). Its marriage with the Zapata Telephony system concept
> and hardware/driver/ library design and interface allowed it
> to grow to be a real switch, that could talk to real
> telephones, lines, etc.
>
> Additionally Mark has nothing short of brilliant insight into
> VOIP, networking, system internals, etc., and at the
> beginning of all this had a great interest in Telephones and
> Telephony. But he had limited experience in Telephone
> systems, and how they work, particularly in the area of
> telecom hardware interfaces. From the beginning I was and
> always have been there, to help him in these areas, both
> providing information, and implementing code in both the
> drivers and the switch for various things related to this.
> We, and now more recently others have made a good team (heck
> I ask him stuff about kernels, VOIP, and other really
> esoteric Linux stuff all the time), working for the common
> goal of bringing the ultimate in Telecom technology to the
> public at a realistic and affordable price.
>
> Since the ISA card, I designed the "Tormenta 2 PCI Quad
> T1/E1" card, which Mark marketed as the Digium T400P and
> E400P, and now Varion is marketing as the V400P (both T1 and
> E1). All of the design files (including photo plot files) are
> available on the Zapatatelephony.org website for public consumption.
>
> We have more, higher-density designs on the way.
>
> As anyone can see, with Mark's dedicated work (and a lot of
> Mine and other
> people's) on the Zaptel drivers and the Asterisk software,
> the technologies have come a long, long way, and continue to
> grow and improve every day.
>
>
> Footnote:
>
> Has anyone ever taken a moment to sit back and consider the
> ENORMOUS responsibility that Mark has taken upon himself by
> doing this project? Have you ever thought of how incredibly
> many things that he has to concern himself with, and that it
> just *NEVER ENDS*! At this point, I believe that I have
> worked with him on this project longer that just about
> anyone, including some of his employees, and believe me, I
> have a good vantage point to see at least some of the stuff
> that he has to go through to accomplish this.
>
> Personally, I would have *NEVER* taken on such a task, being
> that I am and was quite aware of the level of responsibility required
> to do so.
>
> Yes, the task that I took on was and is quite a task, and
> quite a responsibility, but I did what I knew I could
> accomplish. Mark's part is way larger then mine, and all I
> can say that I know what it takes for him to do what he is
> doing, and I seriously appreciate the time and dedication
> that he has put into all the incredibly wonderful things that
> he has done for it and all of us.
>
> Furthermore, Id like to seriously thank all of the project
> contributors and everyone else that has done some part to
> help with this project. Thank you for demonstrating that you
> believe in it, and that you believe in us.

http://www.asteriskdocs.org/modules/tin ... .php?id=10

((Amazing historical read!))


73


Image

k5TRY
;(;)
http://qsl.net/k5try
;(;)

Return to “Newbies / Greenhorns / Say "HI"”

Who is online

Users browsing this forum: No registered users and 1 guest